If you’re searching for more line capacity and stress resistance when fishing with a graphite rod, tying a braided line to a monofilament line is a must-know technique. Besides the fact that braided fishing lines may enhance throwing distance and have a low profile, they are also more durable than monofilament lines. This guide on how to tie braided line to monofilament line will help you tie them together with ease, ensuring your next fishing trip runs smoothly.
Braided line and monofilament line are both popular fishing lines for anglers, though they are used in different applications and aren’t interchangeable.
The biggest differences between the two types of lines are that the braided line has a round cross-section while monofilament has an oval cross-section and braided line is much stronger than the monofilament line.
We may earn an affiliate commission at no extra cost to you when you buy through links on our website.
Learn more about our Amazon affiliate program
Why Use Braid on Mono?
Why do you need to know how to tie braided line to monofilament line? Monofilament is a synthetic, single strand of line that consists of one polymer resin. It comes in different sizes and colors, including clear. The most common type of monofilament line used for fishing is made out of nylon or polyester.
However, due to their sensitivity to ultraviolet light and their tendency for kinking when they get wet, monofilaments are often mixed with other line types (or coated with silicone) so they can be used as fishing lines without breaking or becoming unmanageable.
Using braided lines enhances throwing distance since they are more difficult to break. Braided line is more costly than other fishing lines, but it’s the best choice for angling in shady or weed-filled locations. While the monofilament fishing line is strong, it can fail when a fish is thrashing around and pulls with a lot of force.
You’ll need braid in your arsenal if you’re planning on catching bigger fish or if you’re fishing in waters that require extra strength. Braid has more stretch than mono and will also sink deeper into the water than mono.
It also repels moisture better, so it’s more abrasion-resistant. If your setup needs extra durability, then you need to learn how to tie braided line to monofilament line.
Fishing Knots for Braided Line to Monofilament
Understanding the right knots to use in the process is one of the basic techniques that every angler should have.
To get you started, here are some of the most common fishing knots for braided line to monofilament:
- The double unit knot
- The Royal Polaris knot which is fast and easy to tie
- The FG knot which is ideal for heavy dragging kind of fishing
What is the Best Knot for Braid to Mono?
In order to attach your monofilament leader to the braided fishing lines, you may use numerous knots, but from experience, there’s only one knot you should master.
It’s known as the Uni to Uni Knot, or the Double Uni Knot, depending on who fisherman you ask. It’s the best braid to mono knot.
Three things make this knot so appealing to most anglers:
- Tying the knot is a simple enough task that even your kids can do it
- It’s the strongest braid to mono knot
- Fast and easy to learn in a few steps
How to Tie Braided Line to Monofilament Line Using a Double Uni Knot
Using a Double Uni Knot, you may attach the braided line to a monofilament leader in an easy step-by-step way.
- Start by holding several of your lines in a parallel position (both lines). As you hold them parallel to one other, take approximately six to ten inches of each and keep them there.
- Braided line and monofilament leader should be held parallel between your index finger and thumb, depending on whether you’re left- or right-handed. To begin, you may use either braided or monofilament lines, but we prefer braided since it naturally rises above monofilament.
- Next, we’ll make our first loop. Your right index finger and right thumb may be used to form a loop with your braided line, depending on where you are in relation to the horizon. You don’t need a huge loop, just enough to allow you to move about freely.
- Using your left thumb and index finger, pinch the tag’s loop so that a little portion of the monofilament is left hanging.
- The braided line should be threaded through the loop you’ve made.
- Carefully thread the braided tag through the large loop you just made with your right thumb and index finger.
- The braided line should be wrapped around the monofilament leader and the loop you just made. Depending on the diameter of your braided line, the number of times you should wrap it around the leader and loop will vary, but a good rule of thumb is 5 to 8 times.
- Your Double Uni Knot will begin to tighten once you pull the tag. The result should appear like a little spring if you did it right.
- Begin the procedure from scratch the monofilament leader is back. Make a knot with your right thumb and index finger, then flip the lines so that the monofilament is on top.
- To finish, use monofilament fishing line instead of braided fishing line and repeat the whole procedure
- The difference now is that the monofilament is larger than the braided line, therefore, you won’t need as many revolutions as you did previously. About four trips around the circle will do.
- You should now have two separate Uni Knots on each side of each other. Cut the tags once you’ve tied a tight knot with both lines by pulling on them in opposite directions.
That’s simply how to tie mono to braid using a Double Uni knot. This knot is all you need to keep your braided line attached to the monofilament leader.
So that’s basically how to tie braided line to monofilament line using a Double Uni knot. This knot can be used for any type of fishing where you need to attach monofilament directly to braided line, such as trolling for walleye or catfish.
It can also be used for connecting two sections of braided line together if you need more length than what comes on spools.
While we’ve detailed how to attach braids here, keep in mind that different types of lines may require different knots so make sure you check manufacturer recommendations before getting started!